STAINLESS STEEL

Steels

Stainless Steel

Description

Stainless steel are widely used in petroleum, chemical enterprise, superheater of boiler, heat exchanger, medical care, power station, transportation, construction and ornament, decoration, machinery furniture, automobile, industry instrument, agriculture, kitchenware, etc ...
<< Back to Description
(Unit: inch)
Height(Ga) Width Inside Diameter Length Alloy Num Surface
22.00 48.00 - 120.00 304 #4
16.00 48.00 - 96.00 304 #4
16.00 48.00 - 120.00 304 #4
18.00 48.00 - 120.00 304 #4
18.00 48.00 - 96.00 304 #4
20.00 48.00 - 120.00 304 #4
11.00 48.00 - 120.00 304 #4
12.00 48.00 - 120.00 304 #4
18.00 36.00 - 96.00 304 #4
18.00 36.00 - 120.00 304 #4
14.00 48.00 - 120.00 304 #4
14.00 48.00 - 96.00 304 #4
16.00 60.00 - 120.00 304 #4
20.00 36.00 - 120.00 304 #4
20.00 36.00 - 96.00 304 #4
16.00 48.00 - 107.00 439 2D
16.00 48.00 - 96.00 304 #4
16.00 48.00 - 120.00 304 #4
16.00 60.00 - Coil 304 #4
16.00 48.00 - Coil 304 #4
16.00 60.00 - Coil 304 2B
11.00 60.00 - Coil 304 2B
12.00 60.00 - Coil 304 2B
12.00 60.00 - 120.00 304 #4
11.00 60.00 - 120.00 304 #4
11.00 48.00 - 120.00 304 2B
12.00 48.00 - 96.00 304 2B
12.00 48.00 - 120.00 304 2B
14.00 48.00 - 96.00 304 2B
20.00 48.00 - Coil 430 BA
11.00 48.00 - 96.00 304 2B
16.00 48.00 - 96.00 304 2B
16.00 48.00 - 96.00 304 2B
18.00 48.00 - 120.00 304 2B
18.00 48.00 - 120.00 304 #4
20.00 48.00 - 96.00 304 #4
11.00 48.00 - 96.00 304 #4
1.00mm 1500mm - Coil 304 2B
1.20mm 1500mm - Coil 304 2B
22.00 5.00 - Coil 430 BA
22.00 48.00 - Coil 304 #4
0.018" 3.062 - Coil 304 2B
0.018" 2.55 - Coil 304 2B
16.00 - 48.00 96.00 304 #4 fiber laser
20.00 - 48.00 120.00 304 #4 fiber laser
11.00 - 48.00 120.00 304 #4 fiber laser
12.00 - 48.00 120.00 304 #4 fiber laser
18.00 - 36.00 96.00 304 #4 fiber laser
14.00 - 48.00 96.00 304 #4 fiber laser
20.00 - 48.00 120.00 304 #4
24.00 - 48.00 Coil 304 BA BRITE
0.7mm - 1220mm 2440mm 304 2B
0.7mm - 1220mm 2440mm 304 #4
0.9mm - 1220mm 2440mm 304 #2B
0.9mm - 1220mm 2440mm 304 #2B
1.00mm - 1220mm 2440mm 304 #2B
1.00mm - 1220mm 2440mm 304 #2B
1.00mm - 1220mm 2440mm 304 #2B
1.00mm - 1220mm 2440mm 304 #4
1.00mm - 1220mm 2440mm 304 #2B
1.00mm - 1220mm 2440mm 304 #4
2.00mm - 1220mm 2440mm 304 #2B
2.00mm - 1220mm 2440mm 304 #2B
2.00mm - 1220mm 2440mm 304 #4
2.00mm - 1220mm 2440mm 304 #2B
3.00mm - 1220mm 2440mm 304 #2B
3.00mm - 1220mm 2440mm 304 #2B
3.00mm - 1220mm 2440mm 304 #4
2.00mm - 1220mm 2440mm 304 #2B
3.00mm - 1220mm 2440mm 304 #2B
1.00mm - 1220mm 2440mm 304 #2B
3.00mm - 1220mm 2440mm 304 #1
4.00mm - 1220mm 2440mm 304 #1
4.00mm - 1500mm 6000mm 304 #1
5.00mm - 1220mm 2440mm 304 #1
8.00mm - 1220mm 2440mm 304 #1
8.00mm - 1500mm 6000mm 304 #1
10mm - 1220mm 2440mm 304 #1
10mm - 1500mm 6000mm 304 #1
12mm - 1220mm 2440mm 304 #1
12mm - 1500mm 6000mm 304 #1
15mm - 1220mm 2440mm 304 #1
4.00mm - 1220mm 2440mm 304 #1
2.00mm - 1220mm 2440mm 304 #2B
3.00mm - 1220mm 2440mm 304 #2B

Galvanized Steel

Description

Galvanization is the process of applying a protective coating to steel or iron. The coating is made from zinc and is used to halt the formation of rust. Galvanization is important because it provides long-lasting protection for steel and iron products.
  • Main frame is made of hot roll H-style steel or welded H-style.
  • Fast construction, easy installation, time saving, labor-saving and stable structural.
  • Light weight, high strong, large span and can improve higher space efficiency.
  • It can be pre-fabricated and customire design and earthquake proofing, waterproofing, anticorrosion, beautiful appearances.
  • It has a good ability to assemble at site, and free in designing partitioning and transportation.
  • It has a low foundation cost, energy conserving and environmental protection, and it can be recycled and be use circularly.
  • Usage: workshop, office, warehouse, single-layered heavy plants, large-span public buildings, multi-storey.
    • <!-- -->
    << Back to Description
    Alloy Num Height Width I.D Length Surface

    Carbon Steel

    Description

    Carbon Steel can be segregated into three main categories: Low carbon steel (sometimes known as mild steel); Medium carbon steel; and High carbon steel.
  • Low Carbon Steel (Mild Steel): Typically contain 0.04% to 0.30% carbon content. This is one of the largest groups of Carbon Steel. It covers a great diversity of shapes; from Flat Sheet to Structural Beam. Depending on the desired properties needed, other elements are added or increased. For example: Drawing Quality (DQ) – The carbon level is kept low and Aluminum is added, and for Structural Steel the carbon level is higher and the manganese content is increased.
  • Medium Carbon Steel: Typically has a carbon range of 0.31% to 0.60%, and a manganese content ranging from .060% to 1.65%. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment.
  • High Carbon Steel: Commonly known as “carbon tool steel” it typically has a carbon range between 0.61% and 1.50%. High carbon steel is very difficult to cut, bend and weld. Once heat treated it becomes extremely hard and brittle.
    • <!-- -->
    << Back to Description
    Alloy Num Height Width I.D Length Surface